Question 1

How much does garage door repair cost?

Accepted Answer

It depends on the issue. A roller replacement costs less than a full spring swap, and a simple adjustment costs less than a panel replacement. We quote every repair on-site before we start so you know the exact price.

Question 2

Can most garage door repairs be done in one visit?

Accepted Answer

Yes. We stock the most common parts on the truck: springs, cables, rollers, hinges, bottom seals, and opener components. The majority of residential repairs are diagnosed and completed the same visit without waiting on special orders.

Question 3

Do you charge a diagnostic or service call fee?

Accepted Answer

Yes. We charge a service call fee. If we need to make a return visit, we generally remove a second charge.

Question 4

How do I know if my garage door needs repair?

Accepted Answer

Common signs include grinding or squealing noises, the door moving unevenly or jerking, visible gaps when closed, the door reversing before fully closing, slow response from the opener, or the door feeling heavier than usual when lifted manually. If anything feels or sounds different than it used to, something is wearing out.

Question 5

How long does a garage door repair take?

Accepted Answer

Most repairs take between 30 minutes and two hours depending on the issue. A roller swap is on the shorter end. A full cable and spring replacement takes a bit longer. We'll give you a time estimate along with your quote so you can plan your day.

Question 6

Is it safe to use my garage door if something seems wrong?

Accepted Answer

If the door is making unusual noises or moving erratically, stop using it until a technician can look at it. A minor issue like a worn roller is low risk, but a fraying cable or a scraping bottom fixture that's about to fail can cause the door to drop without warning. When in doubt, disconnect the opener and leave the door closed until we can get out there.

Question 7

Should I repair or replace my garage door?

Accepted Answer

It depends on the age of the door, the extent of the damage, and how much you've already put into repairs. If you're replacing panels every year or the door is 20+ years old and showing its age, a replacement might make more financial sense. We'll give you an honest recommendation based on what we see, not what adds more to a commission check

Question 8

What brands of garage doors and openers can you repair?

Accepted Answer

We service all major residential brands: Clopay, Amarr, Wayne Dalton, CHI, DoorLink, Ideal, and others. For openers, we work on LiftMaster, Chamberlain, Genie, Craftsman, and most other brands on the market. If you've got a door and it's not working right, we can fix it.

Question 9

Can I buy my own door and have you install it?

Accepted Answer

Absolutely. We install customer-supplied doors from big box stores and other suppliers. Just let us know the brand, model, and size ahead of time so we can verify it fits your opening and has all the necessary hardware included.

Question 10

What happens if my frame is rotted or damaged?

Accepted Answer

We inspect the framing before every installation. If the jambs or header need work, we'll let you know and quote the re-frame separately. We're a licensed general contractor, so we handle structural framing in-house, no need to call a separate carpenter.

Question 11

How do I know what size garage door I need?

Accepted Answer

We measure for you. The opening width, height, headroom above the opening, sideroom beside the tracks, and backroom depth all factor into which door fits your garage. We handle this during the on-site visit so you don't have to guess.

Question 12

Do you remove and haul away the old door?

Accepted Answer

Yes. We remove your existing door, track, and hardware as part of the installation. We haul everything away so you're not left with a pile of old panels in your driveway.

Question 13

How long does a garage door installation take?

Accepted Answer

Most single-door installations are completed in 1-2 hours. A double-wide door is typically completed in around 3-4 hours. We handle everything in one visit: removal of the old door, full installation of the new one, and final testing before we leave.

Question 14

What garage door brands do you install?

Accepted Answer

We install doors from Clopay, DoorLink, Amarr and CHI. Each brand offers different price points, insulation levels, and design options. We'll help you choose the right fit based on your home, your budget, and how you use your garage.

Question 15

Can I open my garage door with a broken torsion spring?

Accepted Answer

You shouldn't. The spring counterbalances the full weight of the door, and without it the opener is trying to lift 75–400 pounds on its own. Forcing it can burn out your opener motor, snap cables, or cause the door to drop unexpectedly. Keep the door closed and call us. Our Service Call Fee is cheaper than an ER copay.

Question 16

Can I replace a torsion spring myself?

Accepted Answer

We DO NOT recommend it. Torsion springs are under extreme tension and REQUIRE specific winding bars, experience, and knowledge of spring mechanics to handle safely. ** Improper installation can result in serious injury, death or damage to the door**. This is one repair that should always be left to a trained technician.

Question 17

Can I just replace one torsion spring?

Accepted Answer

If your door has two springs and only one broke, we strongly recommend replacing both. The other spring has the same amount of wear and is likely close behind. Replacing both at once saves you a second service call and ensures the door stays balanced.

Question 18

How long does a torsion spring replacement take?

Accepted Answer

Most torsion spring replacements take about 45 minutes to an hour from the time we start working. That includes releasing the old spring, installing the new one, winding it to the correct tension, and testing the door through multiple cycles.

Question 19

What kind of torsion springs do you use?

Accepted Answer

We use USA Made, oil-tempered steel torsion springs sized to match your specific door weight and height. We don't use whatever's cheapest or whatever's on the truck. We match the spring to the door so it performs correctly and lasts the full cycle life.

Question 20

Why did my torsion spring break?

Accepted Answer

Torsion springs have a finite lifespan measured in cycles: one cycle is one open and one close. A standard spring is rated for roughly 10,000 cycles. If your household opens the door 4–6 times a day, that's about 7–10 years of life. They don't break because something went wrong. They break because they've done their job for as long as they were designed to.

Question 21

How do I know if my torsion spring is broken?

Accepted Answer

The most obvious sign is a loud bang from the garage followed by the door not opening. If you look at the horizontal bar above your door and see a gap in the coil or the spring hanging loose, it's broken. The door will feel extremely heavy if you try to lift it manually — do not force it.

Before you call.

Do you replace garage door cables?

Can you really come the same day?

My spring snapped. Is the door safe to use?

Where We Serve

Serving 43 cities across the KC Metro

Kansas

Overland Park, KS

Leavenworth, KS

Gardner, KS

Bonner Springs, KS

De Soto, KS

Kansas City, KS

Lenexa, KS

Spring Hill, KS

Basehor, KS

Leawood, KS

Merriam, KS

Louisburg, KS

Mission, KS

Fairway, KS

Westwood, KS

Shawnee, KS

Olathe, KS

Paola, KS

Lake Quivira, KS

Lansing, KS

Roeland Park, KS

Edgerton, KS

Prairie Village, KS

Missouri

Raytown, MO

Independence, MO

Kansas City, MO

Platte City, MO

Parkville, MO

Grandview, MO

Excelsior Springs, MO

Gladstone, MO

Grain Valley, MO

Belton, MO

Peculiar, MO

Oak Grove, MO

Blue Springs, MO

North Kansas City, MO

Lee's Summit, MO

Pleasant Hill, MO

Kearney, MO

Raymore, MO

Smithville, MO

Harrisonville, MO

Liberty, MO

Archie, MO